Surface Active Agent Flushing Agent Liquid
KC-CX surface active agent flushing agent liquid. KC-CX surfactant flushing agent is formulated by a variety of high-efficiency surfactants and other additives. Through osmotic decomposition, the mud cakes formed during drilling are dispersed, eroded and washed, and deep flushing oil layer interface adheres to crude oil, thereby Improve the quality of interface bonding.
Product Description
Overview
Suitable for medium and high temperature low density, conventional density and high density cement slurry systems.
Applicable temperature range: 30~120ºC.
Good compatibility with drilling mud.
Good compatibility with cement slurry.
Prepare a certain concentration of water solution, or mix it in proportion during construction.
Physical and chemical indicators
| Appearance | Density, g/cm3 | Water solubility | Freezing point, ºC |
| Colorless or light yellow liquid | 1.10±0.10 | 100% | ≤-5 |
Rinse solution formula
| Rinse fluid density | Recommended dosing volume |
| 1.00±0.01g/cm3 | prepared into 2~50% concentration aqueous solution |
Flushing fluid performance
| Item | Experimental conditions | Technical indicators |
| PH value | normal temperature | 6.0~9.0 |
| Density, g/cm3 | room temperature | 1.00±0.05 |
| Flushing efficiency,% | normal temperature | ≥80% |
Packaging and storage
Use 20kg or 25kg, 200L or 5USgal plastic drums, or according to customer requirements.
The shelf life is 12 months. If the shelf life is exceeded, it can be used only after passing the inspection. It should be stored in a ventilated, cool, and dry warehouse to avoid sun and rain. It is recommended that the barrel stack height does not exceed 3 layers.
